Oils

Products

Base Oils

Egypt Oil Base Oils are efficient in manufacturing various applications in gasoline engine oils, diesel engine oil, transmission & gear oils and multi functional oils.
Egypt Oil Base Oil can be used in various industrial applications such as the processing of rubber or mixture and in-general can be used as efficient process oils. Our standard base oils are as follows:

Low Light Base Oil (LLBO)

Sno.	Test Parameters	Test Method	Units	Specifications
1	Appearance	Visual	*	C&B
2	Color, Max	D-1500	*	< 3
3	DEnsity@15°C	D-1298	kg/m3	855-870
4	Kinematic Viscosity@40°C	D-445	cSt	13.0-17.0
5	Kinematic Viscosity@100°C	D-445	cSt	3.1-3.7
6	Viscosity Index, Min.	D-2270	*	95
7	Flash Point (COC), Min	D-92	°C	140
8	Neutralization No., Max.	D-974	mgKOH/gm	<0.05
9	Water & Sediments	D-1796	Wt%	≤0.1
10	Sulphur Content	D-4294	Wt%	0.4-0.8
11	Ash Content, Max.	D-482	Wt%	≤0.05

Light Base Oil (LBO)

Sno.	Test Parameters	Test Method	Units	Specifications
1	Appearance	Visual	*	C&B
2	Color	D-1500	*	< 2.5
3	Density@15°C	D-1298	kg/m3	860-880
4	Kinematic Viscosity@40°C	D-445	cSt	22-34
5	Kinematic Viscosity@100°C	D-445	cSt	4.2-5.0
6	Viscosity Index, Min.	D-2270	*	95
7	Flash Point (COC), Min	D-92	°C	180
8	Neutralization No., Max.	D-974	mgKOH/gm	0.05
9	Water & Sediments	D-1796	Wt%	≤0.1
10	Sulphur Content	D-4294	Wt%	1
11	Ash Content, Max.	D-482	Wt%	0.01
12	Copper corrosion	D-130	100°C/3hrs	1a
13	pour point	D-97	°C	-3

Medium Base Oil (MBO)

Sno.	Test Parameters	Test Method	Units	Specifications
1	Appearance	Visual	*	C&B
2	Color	D-1500	*	< 3
3	Density@15°C	D-1298	kg/m3	872-885
4	Kinematic Viscosity@40°C	D-445	cSt	38-49
5	Kinematic Viscosity@100°C	D-445	cSt	6.0-7.0
6	Viscosity Index, Min.	D-2270	*	95
7	Flash Point (COC), Min	D-92	°C	>210
8	Neutralization No., Max.	D-974	mgKOH/gm	0.05
9	Conradson Carbon Residue	D-189	Wt%	0.05
10	Sulphur Content	D-4294	Wt%	0.9
11	Ash Content, Max.	D-482	Wt%	0.01
12	Copper corrosion	D-130	100°C/3hrs	1a
13	pour point	D97	°C	-6

Heavy Base Oil (HBO)

Sno.	Test Parameters	Test Method	Units	Specifications
1	Appearance	Visual	*	C&B
2	Color	D-1500	*	<3.5
3	Density@15°C	D-1298	kg/m3	880-890
4	Kinematic Viscosity@40°C	D-445	cSt	75-98
5	Kinematic Viscosity@100°C	D-445	cSt	9.0-11.0
6	Viscosity Index, Min.	D-2270	*	90
7	Flash Point (COC), Min	D-92	°C	>240
8	Neutralization No., Max.	D-974	mgKOH/gm	0.05
9	Conradson Carbon Residue	D-189	Wt%	0.1
10	Sulphur Content	D-4294	Wt%	1.1
11	Ash Content, Max.	D-482	Wt%	0.01
12	Copper corrosion	D-130	100°C/3hrs	1a
13	pour point	D-97	°C	-6

Very Heavy Base Oil (HHBO)

Sno.	Test Parameters	Test Method	Units	Specifications
1	Appearance	Visual	*	brownish
2	Density@15°C	D-1298	kg/m3	880- 900
3	Kinematic Viscosity@40°C	D-7042	cSt	to be reported
4	Kinematic Viscosity@100°C	D-7042	cSt	>10.5
5	Viscosity Index, Min.	D-7042	*	95
6	Flash Point (COC), Min	D-92	°C	>235
7	pour point	D-97	°C	-3

Solvent

Light Solvent

Sno.	Test Parameters	Test Method	Units	Specifications
1	Appearance	Visual	*	Yellow & Brownish
2	Density@15°C	D-1298	kg/m3	765- 800
3	Kinematic Viscosity@40°C	D-445	cSt	0.5- 1.4
4	Calorific Value	D-4868	BTU/lb	<9000
5	Flash Point (COC), Min	D-92	°C	>12
6	Water & Sediments	D-1796	°C	0.5
7	Boiling Point	D-2887	°C	<36- 395
8	Conradson Carbon Residue	D-189	%	0.05
9	Sulphur Content	D-129	wt%	0.9
10	Ash Content	D-482	wt%	0.1

Heavy Solvent

Sno.	Test Parameters	Test Method	Units	Specifications
1	Appearance	Visual	*	Brownish
2	Density@15°C	D-1298	kg/m3	>820
3	Kinematic Viscosity@40°C	D-445	cSt	<5.0
4	Calorific Value	D-4868	BTU/lb	>7000
5	Flash Point (COC), Min	D-92	°C	>50
6	Water & Sediments	D-1796	°C	<0.3
7	Neutralization Nu.	D-974	mg KOH/gm	<0.05
8	Cetane Index	D-976	**	>45
9	Sulphur Content	D-129	wt%	0.5- 1.3
10	Ash Content	D-482	wt%	0.01- 0.1

INSULATING MATERIALS

Light Insulating Materials

Sno.	Test Parameters	Test Method	Units	Limits	Specifications
1	Appearance	Visual	*
2	Color	D-1500	*	Max	D8
3	Density@15°C	D-4052	Kg/m3	Min	865
4	Kinematic Viscosity@50°C	D-445	cSt	Min	18
5	Flash Point (COC), Min	D-92	°C	Min	190
6	Flash Point (PMCC), Min	D-93	°C	Min	185
7	Pour Point	D-97	◦C	Min	-3
8	Sediments	D-473	Wt%	Max	0.01
9	Sulphur	D-4294	m/m%	Max	0.5
10	Water	D-95	Wt%	Max	0.01
11	Neutralization No., Max.	D-974	mgKOH/gm	Max	0.05
12	Ash Content, Max.	D-482	Wt%	Max	0.002
13	Distillation recovery GC status
	IBP	D86	◦C
	10%
	20%
	50%
	85%
	90%
	FBP
	Residue

Heavy Insulating Materials

Sno.	Test Parameters	Test Method	Units	Limits	Specifications
1	Appearance	Visual	*
2	Color	D-1500	*	Max	D8
3	Density@15°C	D-4052	Kg/m3	Min	865
4	Kinematic Viscosity@50°C	D-445	cSt	Min	18
5	Flash Point (COC), Min	D-92	°C	Min	190
6	Flash Point (PMCC), Min	D-93	°C	Min	185
7	Pour Point	D-97	◦C	Min	-3
8	Sediments	D-473	Wt%	Max	0.01
9	Sulphur	D-4294	m/m%	Max	0.5
10	Water	D-95	Wt%	Max	0.01
11	Neutralization No., Max.	D-974	mgKOH/gm	Max	0.05
12	Ash Content, Max.	D-482	Wt%	Max	0.002
13	Distillation recovery GC status
	IBP	D86	◦C
	10%
	20%
	50%
	85%
	90%
	FBP
	Residue

Process Lube Oil (PLO)

Sno.	Test Parameters	Test Method	Units	Limits	Specifications
1	Appearance	Visual	*
2	Color	D-1500	*	Max	D8
3	Density@15°C	D-4052	Kg/m3	Min	865
4	Kinematic Viscosity@50°C	D-445	cSt	Min	18
5	Flash Point (COC), Min	D-92	°C	Min	190
6	Flash Point (PMCC), Min	D-93	°C	Min	185
7	Pour Point	D-97	◦C	Min	-3
8	Sediments	D-473	Wt%	Max	0.01
9	Sulphur	D-4294	m/m%	Max	0.5
10	Water	D-95	Wt%	Max	0.01
11	Neutralization No., Max.	D-974	mgKOH/gm	Max	0.05
12	Ash Content, Max.	D-482	Wt%	Max	0.002
13	Distillation recovery GC status
	IBP	D86	◦C
	10%
	20%
	50%
	85%
	90%
	FBP
	Residue

TAR OIL 

Sno.	Test Parameters	Test Method	Units	Limit	Specification
1	Appearance	Visual	*	–	–
2	Density@15°C	D-1298	kg/m3	Min	900
3	Kinematic Viscosity@50°C	D-445	cSt	Min	1500
4	Kinematic Viscosity@100°C	D-445	cSt	MIn	215
5	Viscosity Index	D-7042	*	Min	75
6	Flash Point (COC)	D-92	°C	Min	250
	Flash Point (PMCC)	D-93	°C	Min	225
7	water & Sediment	D-1796	°C	Max	0.01
8	Penetration Rate at 25C	D-5	0.1mm	Range	50-70
9	Softening Point	D-36	°C	Range	42-56
10	Sulfur	D-4294	wt%	Max	1.5
11	Solubility in CS2	D-4	wt%	Max	99.5
12	Ductility at 25C	D-113	cm	Min	100
13	Weight loss by Heating	D-6	wt%	Max	0.2
14	Penetration loss by heating	D-6 & D-5	wt%	Max	20
15	Spot Test	AASOT-102	–	–	Negative